Arrowzoom Acoustic Polyester Fabric Panel Product Description & Complete Guide
Arrowzoom Acoustic Polyester Fabric Panel is made with High Quality Imported Fabric. Sound vibrations are broadcast thru the air, causing issues with noise entering and exiting your house studio. This sound absorbing Polyester Fabric panel is designed to reduce echo within an environment. The Acoustic Studio Panel enhances the sound quality and aesthetics of any recording or listening environment.
Features & Highlights of Acoustic Polyester Fabric Panel:
✅ Easy to install
At more than 200kg/m acoustic Panel cell structure for maximum noise absorption to provide proven acoustical solutions.
✅ Sound Absorbing
Packed with High NRC rating that helps to flutter echoes and reduce excess reflections and reverberation.
✅ Cost-Effective
Appealing yet effective soundproofing panels at cost-effective prices.
✅ Multi-Function
Use it in Home Theaters, Studios or Gaming Room for acoustic treatment / Isolation Shield , or in offices as a Desk Privacy Panel
✅ Colors and Styles
Multi-colors and patterns are provided for you to choose from. You can make your own combinations to soundproof and decorate your room at the same time.
Before & After Installed Sound Deadening Polyester Fabric Panel
Arrowzoom Soundproof Foam Sound Test
In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration
Technical Data Sheet
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
How To Install Our AcouticPolyester Fabric Panel Step By Step
Step 1: Locate the Acoustic Foam For Outline
Lay the Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.
Step 2: Resize the Acoustic Foam To Best Fit
Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Step 3: Apply Arrowzoom Tape or Glue the Acoustic Foam with Adhesive Spray
There are two ways to put the acoustic foams on the designated wall
Method 1: Use Arrowzoom Sticky Double Sided Tape. Each foam should use 4 tapes. One for each corner. Once you peel off the sticker, the Acoustic foam should easily stick to the surface of your choice.
Method 2: Glue each piece individually with PL Polyurethane Construction Adhesive. Create a perimeter around the outside of the material staying 1 1/2″ away from the edge. Create an X pattern across the center of the material.
(Note: Due to Shipping Reason, we do not sell Glue)
Step 4: Hang the Acoustic Foam With The Marked Line
Line up the materials on marked lines from Step 2 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.
How to cut the Polyester Fabric Panel?
You can use our Heavy-Duty Wood Acoustic Polyester Fabric Panel Cutter to cut your panels
Step 1: Mark the Acoustic Panel to the appropriate size using the tape measure and marker.
Step 2: Cut along the line using the Panel Cutter. With the thicker fabric, it may take several passes to completely cut the Acoustic Studio Panel.
Step 3: An alternate cutting method is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the fabric.
Technical Specification:
Color:
Black, Dark Gray, Light Blue, Red, Pearl White, Burgundy
Size & Dimension:
30 X 30 X 0.5~0.7 cm (11.8 X 11.8 X 0.2~0.3 in)
- NOTE:
The color stability of PEARL WHITE foams is affected by UV light, oxidation and room temperature. Discoloration (Turn into YELLOWISH color) may occur. Before making a purchase please make sure you are agreeing to this. We will NOT issue refunds after purchase that claim that color has been changed.
Actual color may slightly differ depends on monitor settings.
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
Related products
Uncategorized
Uncategorized
